Aluminum foil rolling mill

The device is used for rolling aluminum strip with less than 0.5mm in the following way. It passes through several pass rolling to make it 2 x 0.0045mm (in principle, need to configure coiler) with the thickness of aluminum foil above.

Process Description: from the coil car with a steel sleeve aluminum coil to double cone uncoiler at the clamping strip to wear speed after entrance device, the host, the exit device, plate type roller, export deflector roll and finally into the coiling machine, coiling machine is cone box structure, empty sleeve is on both sides of the cone box clamping, artificial head wound after a few laps, began to build, entrance tension roller and strip tension, export splash plate is put into use, the export of deflector roll action to generate the appropriate angle, the ironing roller against the uncoiler aluminum coil, after lubrication, host in rolling state, until the book side roll diameter is small enough, the host will slow down, slowly feeding tail winding to winding side, by the end of the coil car rolling good aluminum roll onto the saddle store, after the start of the next round of rolling process.

The modern aluminum foil mill is generally four heavy irreversible rolling mill. According to the different functions, it can be divided into four types: aluminum foil rough medium rolling mill, aluminum foil finishing mill, aluminum foil finishing mill and universal aluminum foil mill. Our company's main products are three foil rolling mills besides universal aluminum foil mill.

Performance statement (as of September 6, 2017)