Cas casting mill

Aluminum casting rolling mill in rolling form is divided into: continuous casting (such as two typical casting roller mill) and continuous casting and rolling (typical example hazret). According to the relative position of two rolls, the two roll casting mill in continuous casting and rolling mill can also be divided into three types: horizontal, inclined and vertical. The twin roll continuous casting mill designed by our company is mainly horizontal and inclined.

The so-called continuous casting rolling of aluminum belt refers to the special processing equipment which combines the two processes of the casting and hot rolling of aluminum. During the rolling process, the casting roller will take away a lot of heat from the molten aluminum, so that the casting and crystallization process can be completed in a short time, and the pressure of the formed casting structure is also processed. Through the intermediate unit's pinch roll, hydraulic shear, eccentric guide roller and guide plate device, the casting and rolling plate is rolled into coil and finally transported by the unloading car to the coil storage rack.

The main differences between the horizontal and the tilted double roll caster are:

The connecting line of the center line of the two roll is different from the angle of the ground, the horizontal connection is perpendicular to the ground, the tilted connection and the ground are not vertical, and generally 15 degrees.

When the roll changing operation is different, the tilting type casting and rolling mill needs to turn the paw to the vertical position of the ground before changing the roll, so that the roll changing operation can be carried out, while the horizontal casting mill can directly change the roll.

The configuration is different, the inclined type needs the main drive removal mechanism, the archway rotation mechanism, and so on.

Different from the horizontal, inclined to the remarkable characteristics of melt (i.e. liquid aluminum) by entering the two level and under the direction of upward, so that the injection of roll gap melt is strictly controlled in the static pressure is certain, by feeding mouth to rotate with uniform and continuous roll gap in melt supply. Compared with the horizontal casting rolling mill, the aluminum plate slab produced by this way has high compactness and low hydrogen content, and the slab has better quality than the horizontal one when producing double zero foil. So this is the main model of the current market.

Horizontal double drive aluminum strip continuous casting rolling mill

Tilted double drive aluminum strip continuous casting rolling mill

Caster performance table (by the end of August 2017)

Serial number

Project number

Project full name

Customer name

Customer number

One

Z011

680 * 1600mm aluminum continuous casting machine

Henan Xichuan aluminum (Group) Co., Ltd.

1# casting mill

Two

Z013

1000 * 1850mm level dual drive aluminum strip continuous casting and rolling mill

Dengdian group aluminum processing Co. Ltd.

3# and 4# casting mill

Three

Z032

980 * 1600mm aluminum strip continuous casting machine

Henan Xichuan aluminum (Group) Co., Ltd.

7# casting mill

Four

Z034

980 * 1600mm aluminum strip continuous casting machine

Henan Xichuan aluminum (Group) Co., Ltd.

8# casting mill

Five

Z042

700 * 1600mm level dual drive aluminum strip continuous casting machine

Shandong Fuhai industrial Limited by Share Ltd

4# casting mill

Six

Z044

700 * 1600mm level dual drive aluminum strip continuous casting machine

Shandong Fuhai industrial Limited by Share Ltd

6# casting mill

Seven

Z045

700 * 1600mm level dual drive aluminum strip continuous casting machine

Shandong Fuhai industrial Limited by Share Ltd

5# casting mill

Eight

Z051

1010 * 1900mm inclined double drive casting machine

Henan Xichuan aluminum (Group) Co., Ltd.

20# casting mill

Nine

Z052

1010 * 1900mm inclined double drive casting machine

Henan Xichuan aluminum (Group) Co., Ltd.

19# casting mill